|
|
|
|
Micro B brushless servomotor drives
|
Compact versatile Brushless Servomotor amplifiers
Description
MicroB drives have been designed as ultra compact modules suitable for all industrial automation requirements. They are an
ideal solution for incremental motion control, high precision velocity and torque loop contouring control and positioning systems
which require fast response, high torque at low speed, smooth speed control and high reliability.
|
|
The MicroB range operates from 20 to 82Vdc and drive motors of up to 600W. The MicroB Plus range operate from 20 to 270volts
and drive motors of up to 4000W. Both are suitable for a wide range of DC applications. The unbeatable compact design, low cost
and reliability ensures the MicroB's success.
|
|
|
|
|
|
Standard Features for MCB and MCB plus
- Three phase trapeziodal brushless, four quadrant operation
- Panel mount
- High efficiency reliable power output stage
- Works from single DC power supply
- Torque/current mode option
- Supports 3 velocity feedback modes: Hall, Armature, encoder + hall
- Ixt function
- Torque control
- 5 status LED's
- Fully protected against external short circuits, over-under voltage, over temperature and missing hall signals
- Wide load inductance (0.2- 30mH)
- 60 and 120 degree commutation settings
- Screw terminals
Additional Standard Features on MCB Plus
- Positive and negative limit switch inputsv
- PWM + direction feedback
Adjustments
- KV (proportional gain) and DER (derivative gain) - potentiometers on MicroB, hex switches on Micro B Plus
- Ramp Time
- Offset
- Personality components set gains, continuous and peak currents, and acc/dec times
Options
Additional Options on MCB Plus
- Resolver Feedback
- Differential encoder feedback
- Clock and direction input
Specifications of MCB and MCB plus
|
Output voltage range
|
MCB 60: 20 - 80 Vdc
MCB plus 60: 20 to 80 Vdc
MCB plus 140: 40 to 182 Vdc
MCB plus 200: 55 to 274 Vdc
|
|
Operating frequency
|
22Khz
|
|
Operating temperature
|
32-104oF/ 0-40 oC
|
|
Analog input reference
|
±10V
|
|
Motor current monitor
|
±8V
|
|
Auxiliary output supply for encoder
|
+5V@130mA
|
|
Enable signals
|
+10 to 30VDC
|
|
Output voltage supply
|
+10V/-10V@4mA
|
|
|
|
|
|
