AMC's support more than 20 different events, many having associated conditions. Supported events include: 'Execution start, Execution stop, Tool head down,
Tool head up, Change tool, Key pressed, I/P 'n' ON, and analog On and Off.
'Tool Up' Event Sub for Glass Cutter
'Tool Down' Event Sub for Glass Cutter
Event subroutines are executed automatically by the AMC when the associated event occurs. In consequence neither the part programmer nor the machine user need consider them, this
greatly simplifies machine programming and use. Additionally as the AMC is both controlling machine movement and operating the I/O the two are automatically synchronized.
The NEE Event Subroutine Editor makes generating macro PLC sequences simple, no knowledge of computer programming is required.
Typically the machine designer assigns and names AMC machine controller inputs and outputs to actuators and status signals, these names are part of the controller configuration file.
The resulting configuration file is used by the Event Sub Editor. The named I/O signals are then used to generate the series of control commands and input status monitoring required for
each event subroutine. Event subroutines may also contain conditional commands.
|
|
Part of 'Execution Start' for Glass Cutter
|
Event subroutines are permanently stored in AMC flash memory ensuring that they are immediately available when required.
|
|
